• Hot Water Installation, Service & Repair

    Did you wake up this morning to a cold shower? There's nothing worse than having no Hot Water when you really need it! If you are having issues with your hot water system, contact Mayfair Plumbing and Gasfitting in Adelaide, the Hot Water Wizards. Our licensed plumbers and gasfitters will be there the same day and are always on time. Our Adelaide hot water service repair specialists will get your hot water running in no time.

     

  • $50 Fuel Voucher on All New Hot Water System Installs
  • Old hot water system disposed of free of charge

  • Hot water services

     

    Mayfair Plumbing and Gasfitting in Adelaide provides prompt and professional hot water services for all types of appliances. Our licensed plumbers can quickly and cost effectively identify and solve problems.  We carry a large range of parts in our service vehicles allowing for most problems to be fixed in the same day. Contact the Hot Water Wizards today for:

    • Gas hot water (storage and instant - electronic ignition, hydro and pilot light)
    • Electric hot water (storage, electric assisted and instant)
    • Solar hot water (closed couple systems with tank and panels on roof and split systems with panels on roof and tank on ground)
    • Heat pump hot water

    Quality brands

     

    Mayfair Plumbing and Gasfitting in Adelaide services all the following brands of hot water services, including the main four:

    • ZIP
    • Stiebel Eltron
    • Aquamax
    • Kelvinator
    • Conergy
    • Edwards
    • Apricus
    • Quantum
     
  • Same Day Hot Water Replacement Service

     

    Mayfair Plumbing and Gasfitting guarantee a same day Hot Water System replacement service throughout Adelaide. We have portable Hot Water Services that can be put into any location at any time ensuring you’re never without Hot Water in your house or business.

    We provide outstanding service to clients throughout South Australia and can have a Hot
    Water Wizard to your place within the hour. We provide a 24/7 emergency call out option for when you really need us.

    Call the Hot Water Wizards at Mayfair Plumbing and Gasfitting in Adelaide today for all your Hot Water needs.

    Check out our page on choosing the best hot water system for your home.

  • Getting The Most From Your Hot Water Heater

    If you have just purchased a new water heater it’s something most people don’t budget for, but unfortunately it is a part of running any business or house hold so you want to make sure that you get the longest amount life out of it the system. Below are some recommended hints and tips we suggest that will ensure the maximum life of the system and its related components are achieved:

    • Avoid excessive water pressure to the system. Today most manufacturers will suggest no more then 800kpa of mains pressure be delivered to the system. There are some exceptions to this with Stiebel Eltron only allowing a maximum of 500kpa to some of their systems. The way in which this is achieved is using a pressure reduction valve. These can be installed either directly before the cold water enters the hot water services or near the water meter for the property ensuring all fixtures are protected from high water pressure.
    • Regular maintenance to pressure blow off valves. Mains pressure storage vessels will have two of these in South Australia. One is located on the cold inlet side of the service and the other is on the tank at the top near the hot water outlet. These need to released at regular intervals of the hot water services life to ensure they remain active to the manufacturers specifications and protect the vessel from bursting due to excessive pressures. It is a task which is often over looked but still a crucial task that needs attending.
    • Replacement of sacrificial anodes. Probably one of the most neglected procedures undertaken by property owners is the replacement of the sacrificial anode. Adelaide is known for its hard water and therefore the sacrificial anodes inside mains pressure tanks has a pretty tough life and should be replaced every three to four years to maintain the manufacturers tank warranty and prolong the life of the system after the warranty period has finished. Some manufacturers are now using electronic anodes which therefore do not need replacing, but majority of storage water heaters from Rheem and Rinnai are still using magnesium anode inside their tanks.
    • Cleaning of areas around the water heater. Majority of water heaters are installed down the side of a building or in a plant room which is less trafficked and is out of sight and out of mind. But the downside to this is vegetation can become overgrown and affect the operation of the water heater if it meets it. Another point to note in relation to vegetation is that small creatures like to live in it and can make there way into a water heater as the attraction of the warmth appeals. It is not unusual for us to receive a service call for no hot water and find a fried gecko, spider or wasp stuck inside the operating components of the water heater. Depending on where the offending culprit has entered it can cause significant damage to the electronic components of a water heater and end up costing large amounts of money
    • Solar panel maintenance. As these items are installed on the roof of buildings, they are susceptible to all kinds of dirt, bird droppings and general garden materials such as leaves and branches which can land on them. It is important to keep the panels clean to ensure their ability to maintain maximum efficiency and help reduce power bills.
    • Servicing. Businesses particularly cannot afford to go without hot water and there are certain components which we know the general life span of and should be replaced in order to avoid the loose of hot water. For example, the average life a heating element and thermostat is four to five years, therefore by replacing these currently in the systems life it helps avoid the loose of hot water in an unexpected time. Other parts such as circulating pumps can be tested annually to monitor their output and then programmed for either overhauling or replacement prior to failure.

    Above are some of the more common tips and tasks we undertake for our clients ensuring they get the most out of a new hot water service and avoiding an emergency plumbing call out when it is least practical and far more expensive.

    Preventative Maintenance

     

    Preventative maintenance is something Mayfair Plumbing and Gasfitting specialise in and it is these carefully designed programs we tailor to suit each client we work for (small or large, local or remote) that keeps them in operation year-round without a catastrophic failure. Records of all work performed, and parts installed are kept on our data base which is up loaded to a cloud for ease of access anywhere across the state of South Australia via a mobile device while on the site performing the various tasks.

    Proactive can be better then reactive, we are always looking to take on new clients and would like to discuss with you what our company can do to help you perform without unneeded or unwanted down time.